| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: Apply the link chain quirk on NEC isoc endpoints
Two clearly different specimens of NEC uPD720200 (one with start/stop
bug, one without) were seen to cause IOMMU faults after some Missed
Service Errors. Faulting address is immediately after a transfer ring
segment and patched dynamic debug messages revealed that the MSE was
received when waiting for a TD near the end of that segment:
[ 1.041954] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ffa08fe0
[ 1.042120] xhci_hcd: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0005 address=0xffa09000 flags=0x0000]
[ 1.042146] xhci_hcd: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0005 address=0xffa09040 flags=0x0000]
It gets even funnier if the next page is a ring segment accessible to
the HC. Below, it reports MSE in segment at ff1e8000, plows through a
zero-filled page at ff1e9000 and starts reporting events for TRBs in
page at ff1ea000 every microframe, instead of jumping to seg ff1e6000.
[ 7.041671] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ff1e8fe0
[ 7.041999] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ff1e8fe0
[ 7.042011] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint
[ 7.042028] xhci_hcd: All TDs skipped for slot 1 ep 2. Clear skip flag.
[ 7.042134] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint
[ 7.042138] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 31
[ 7.042144] xhci_hcd: Looking for event-dma 00000000ff1ea040 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
[ 7.042259] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint
[ 7.042262] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 31
[ 7.042266] xhci_hcd: Looking for event-dma 00000000ff1ea050 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
At some point completion events change from Isoch Buffer Overrun to
Short Packet and the HC finally finds cycle bit mismatch in ff1ec000.
[ 7.098130] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13
[ 7.098132] xhci_hcd: Looking for event-dma 00000000ff1ecc50 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
[ 7.098254] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13
[ 7.098256] xhci_hcd: Looking for event-dma 00000000ff1ecc60 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
[ 7.098379] xhci_hcd: Overrun event on slot 1 ep 2
It's possible that data from the isochronous device were written to
random buffers of pending TDs on other endpoints (either IN or OUT),
other devices or even other HCs in the same IOMMU domain.
Lastly, an error from a different USB device on another HC. Was it
caused by the above? I don't know, but it may have been. The disk
was working without any other issues and generated PCIe traffic to
starve the NEC of upstream BW and trigger those MSEs. The two HCs
shared one x1 slot by means of a commercial "PCIe splitter" board.
[ 7.162604] usb 10-2: reset SuperSpeed USB device number 3 using xhci_hcd
[ 7.178990] sd 9:0:0:0: [sdb] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=DRIVER_OK cmd_age=0s
[ 7.179001] sd 9:0:0:0: [sdb] tag#0 CDB: opcode=0x28 28 00 04 02 ae 00 00 02 00 00
[ 7.179004] I/O error, dev sdb, sector 67284480 op 0x0:(READ) flags 0x80700 phys_seg 5 prio class 0
Fortunately, it appears that this ridiculous bug is avoided by setting
the chain bit of Link TRBs on isochronous rings. Other ancient HCs are
known which also expect the bit to be set and they ignore Link TRBs if
it's not. Reportedly, 0.95 spec guaranteed that the bit is set.
The bandwidth-starved NEC HC running a 32KB/uframe UVC endpoint reports
tens of MSEs per second and runs into the bug within seconds. Chaining
Link TRBs allows the same workload to run for many minutes, many times.
No ne
---truncated--- |
| Thecus N4800Eco NAS Server Control Panel contains a command injection vulnerability that allows authenticated attackers to execute arbitrary system commands through user management endpoints. Attackers can inject commands via username and batch user creation parameters to execute shell commands with administrative privileges. |
| Buffer overflow in XPS font parse processing on Small Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code. *: Satera LBP670C Series/Satera MF750C Series firmware v06.02 and earlier sold in Japan.Color imageCLASS LBP630C/Color imageCLASS MF650C Series/imageCLASS LBP230 Series/imageCLASS X LBP1238 II/imageCLASS MF450 Series/imageCLASS X MF1238 II/imageCLASS X MF1643i II/imageCLASS X MF1643iF II firmware v06.02 and earlier sold in US.i-SENSYS LBP630C Series/i-SENSYS MF650C Series/i-SENSYS LBP230 Series/1238P II/1238Pr II/i-SENSYS MF450 Series/i-SENSYS MF550 Series/1238i II/1238iF II/imageRUNNER 1643i II/imageRUNNER 1643iF II firmware v06.02 and earlier sold in Europe. |
| Buffer overflow in Address Book attribute tag processing on Small Office Multifunction Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code. *: Satera LBP670C Series/Satera MF750C Series firmware v06.02 and earlier sold in Japan.Color imageCLASS LBP630C/Color imageCLASS MF650C Series/imageCLASS LBP230 Series/imageCLASS X LBP1238 II/imageCLASS MF450 Series/imageCLASS X MF1238 II/imageCLASS X MF1643i II/imageCLASS X MF1643iF II firmware v06.02 and earlier sold in US.i-SENSYS LBP630C Series/i-SENSYS MF650C Series/i-SENSYS LBP230 Series/1238P II/1238Pr II/i-SENSYS MF450 Series/i-SENSYS MF550 Series/1238i II/1238iF II/imageRUNNER 1643i II/imageRUNNER 1643iF II firmware v06.02 and earlier sold in Europe. |
| Buffer overflow in XPS font fpgm data processing on Small Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code. *: Satera LBP670C Series/Satera MF750C Series firmware v06.02 and earlier sold in Japan.Color imageCLASS LBP630C/Color imageCLASS MF650C Series/imageCLASS LBP230 Series/imageCLASS X LBP1238 II/imageCLASS MF450 Series/imageCLASS X MF1238 II/imageCLASS X MF1643i II/imageCLASS X MF1643iF II firmware v06.02 and earlier sold in US.i-SENSYS LBP630C Series/i-SENSYS MF650C Series/i-SENSYS LBP230 Series/1238P II/1238Pr II/i-SENSYS MF450 Series/i-SENSYS MF550 Series/1238i II/1238iF II/imageRUNNER 1643i II/imageRUNNER 1643iF II firmware v06.02 and earlier sold in Europe. |
| Buffer overflow in CPCA list processing on Small Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code. *: Satera LBP670C Series/Satera MF750C Series firmware v06.02 and earlier sold in Japan.Color imageCLASS LBP630C/Color imageCLASS MF650C Series/imageCLASS LBP230 Series/imageCLASS X LBP1238 II/imageCLASS MF450 Series/imageCLASS X MF1238 II/imageCLASS X MF1643i II/imageCLASS X MF1643iF II firmware v06.02 and earlier sold in US.i-SENSYS LBP630C Series/i-SENSYS MF650C Series/i-SENSYS LBP230 Series/1238P II/1238Pr II/i-SENSYS MF450 Series/i-SENSYS MF550 Series/1238i II/1238iF II/imageRUNNER 1643i II/imageRUNNER 1643iF II firmware v06.02 and earlier sold in Europe. |
| Buffer overflow in XML processing of XPS file in Small Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code. *: Satera LBP670C Series/Satera MF750C Series firmware v06.02 and earlier sold in Japan.Color imageCLASS LBP630C/Color imageCLASS MF650C Series/imageCLASS LBP230 Series/imageCLASS X LBP1238 II/imageCLASS MF450 Series/imageCLASS X MF1238 II/imageCLASS X MF1643i II/imageCLASS X MF1643iF II firmware v06.02 and earlier sold in US.i-SENSYS LBP630C Series/i-SENSYS MF650C Series/i-SENSYS LBP230 Series/1238P II/1238Pr II/i-SENSYS MF450 Series/i-SENSYS MF550 Series/1238i II/1238iF II/imageRUNNER 1643i II/imageRUNNER 1643iF II firmware v06.02 and earlier sold in Europe. |
| Buffer overflow in print job processing by WSD on Small Office Multifunction Printers and Laser Printers(*) which may allow an attacker on the network segment to trigger the affected product being unresponsive or to execute arbitrary code. *: Satera LBP670C Series/Satera MF750C Series firmware v06.02 and earlier sold in Japan.Color imageCLASS LBP630C/Color imageCLASS MF650C Series/imageCLASS LBP230 Series/imageCLASS X LBP1238 II/imageCLASS MF450 Series/imageCLASS X MF1238 II/imageCLASS X MF1643i II/imageCLASS X MF1643iF II firmware v06.02 and earlier sold in US.i-SENSYS LBP630C Series/i-SENSYS MF650C Series/i-SENSYS LBP230 Series/1238P II/1238Pr II/i-SENSYS MF450 Series/i-SENSYS MF550 Series/1238i II/1238iF II/imageRUNNER 1643i II/imageRUNNER 1643iF II firmware v06.02 and earlier sold in Europe. |
| Redragon Gaming Mouse driver contains a kernel-level vulnerability that allows attackers to trigger a denial of service by sending malformed IOCTL requests. Attackers can send a crafted 2000-byte buffer with specific byte patterns to the REDRAGON_MOUSE device to crash the kernel driver. |
| Ether MP3 CD Burner 1.3.8 contains a buffer overflow vulnerability in the registration name field that allows remote code execution. Attackers can craft a malicious payload to overwrite SEH handlers and execute a bind shell on port 3110 by exploiting improper input validation. |
| MyScreenTools v2.2.1.0 contains a critical OS command injection vulnerability in the GIF compression tool. The application fails to properly sanitize user-supplied file paths before passing them to cmd.exe, allowing attackers to execute arbitrary system commands with the privileges of the user running the application. The vulnerability exists in the CMD() function within GIFSicleTool\Form_gif_sicle_tool.cs, which constructs shell commands by concatenating unsanitized user input (file paths) and executes them via cmd.exe. |
| github.com/nwaples/rardecode versions <=2.1.1 fail to restrict the dictionary size when reading large RAR dictionary sizes, which allows an attacker to provide a specially crafted RAR file and cause Denial of Service via an Out Of Memory Crash. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mvpp2_main: fix possible OOB write in mvpp2_ethtool_get_rxnfc()
rules is allocated in ethtool_get_rxnfc and the size is determined by
rule_cnt from user space. So rule_cnt needs to be check before using
rules to avoid OOB writing or NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: exynos: Fix programming of HCI_UTRL_NEXUS_TYPE
On Google gs101, the number of UTP transfer request slots (nutrs) is 32,
and in this case the driver ends up programming the UTRL_NEXUS_TYPE
incorrectly as 0.
This is because the left hand side of the shift is 1, which is of type
int, i.e. 31 bits wide. Shifting by more than that width results in
undefined behaviour.
Fix this by switching to the BIT() macro, which applies correct type
casting as required. This ensures the correct value is written to
UTRL_NEXUS_TYPE (0xffffffff on gs101), and it also fixes a UBSAN shift
warning:
UBSAN: shift-out-of-bounds in drivers/ufs/host/ufs-exynos.c:1113:21
shift exponent 32 is too large for 32-bit type 'int'
For consistency, apply the same change to the nutmrs / UTMRL_NEXUS_TYPE
write. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: Fix configfs group list head handling
Doing a list_del() on the epf_group field of struct pci_epf_driver in
pci_epf_remove_cfs() is not correct as this field is a list head, not
a list entry. This list_del() call triggers a KASAN warning when an
endpoint function driver which has a configfs attribute group is torn
down:
==================================================================
BUG: KASAN: slab-use-after-free in pci_epf_remove_cfs+0x17c/0x198
Write of size 8 at addr ffff00010f4a0d80 by task rmmod/319
CPU: 3 UID: 0 PID: 319 Comm: rmmod Not tainted 6.16.0-rc2 #1 NONE
Hardware name: Radxa ROCK 5B (DT)
Call trace:
show_stack+0x2c/0x84 (C)
dump_stack_lvl+0x70/0x98
print_report+0x17c/0x538
kasan_report+0xb8/0x190
__asan_report_store8_noabort+0x20/0x2c
pci_epf_remove_cfs+0x17c/0x198
pci_epf_unregister_driver+0x18/0x30
nvmet_pci_epf_cleanup_module+0x24/0x30 [nvmet_pci_epf]
__arm64_sys_delete_module+0x264/0x424
invoke_syscall+0x70/0x260
el0_svc_common.constprop.0+0xac/0x230
do_el0_svc+0x40/0x58
el0_svc+0x48/0xdc
el0t_64_sync_handler+0x10c/0x138
el0t_64_sync+0x198/0x19c
...
Remove this incorrect list_del() call from pci_epf_remove_cfs(). |
| In MIT Kerberos 5 (aka krb5) before 1.22 (with incremental propagation), there is an integer overflow for a large update size to resize() in kdb_log.c. An authenticated attacker can cause an out-of-bounds write and kadmind daemon crash. |
| Anevia Flamingo XL 3.2.9 contains a restricted shell vulnerability that allows remote attackers to escape the sandboxed environment through the traceroute command. Attackers can exploit the traceroute command to inject shell commands and gain full root access to the device by bypassing the restricted login environment. |
| SOUND4 IMPACT/FIRST/PULSE/Eco <=2.x contains a conditional command injection vulnerability that allows local authenticated users to create malicious files in the /tmp directory. Unauthenticated attackers can execute commands by making a single HTTP POST request to the traceroute.php script, which triggers the malicious file and then deletes it after execution. |
| SOUND4 IMPACT/FIRST/PULSE/Eco <=2.x contains a conditional command injection vulnerability that allows local authenticated users to create malicious files in the /tmp directory. Unauthenticated attackers can execute commands by making a single HTTP POST request to the vulnerable ping.php script, which triggers the malicious file and then deletes it. |
| SOUND4 IMPACT/FIRST/PULSE/Eco <=2.x contains a command injection vulnerability that allows local authenticated users to create malicious files in the /tmp directory with .dns.pid extension. Unauthenticated attackers can execute the malicious commands by making a single HTTP POST request to the vulnerable dns.php script, which triggers command execution and then deletes the file. |
