| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: intel: quark_dts: fix error pointer dereference
If alloc_soc_dts() fails, then we can just return. Trying to free
"soc_dts" will lead to an Oops. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: bus: verify partner exists in typec_altmode_attention
Some usb hubs will negotiate DisplayPort Alt mode with the device
but will then negotiate a data role swap after entering the alt
mode. The data role swap causes the device to unregister all alt
modes, however the usb hub will still send Attention messages
even after failing to reregister the Alt Mode. type_altmode_attention
currently does not verify whether or not a device's altmode partner
exists, which results in a NULL pointer error when dereferencing
the typec_altmode and typec_altmode_ops belonging to the altmode
partner.
Verify the presence of a device's altmode partner before sending
the Attention message to the Alt Mode driver. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: avoid referencing uninit memory in ath9k_wmi_ctrl_rx
For the reasons also described in commit b383e8abed41 ("wifi: ath9k: avoid
uninit memory read in ath9k_htc_rx_msg()"), ath9k_htc_rx_msg() should
validate pkt_len before accessing the SKB.
For example, the obtained SKB may have been badly constructed with
pkt_len = 8. In this case, the SKB can only contain a valid htc_frame_hdr
but after being processed in ath9k_htc_rx_msg() and passed to
ath9k_wmi_ctrl_rx() endpoint RX handler, it is expected to have a WMI
command header which should be located inside its data payload.
Implement sanity checking inside ath9k_wmi_ctrl_rx(). Otherwise, uninit
memory can be referenced.
Tested on Qualcomm Atheros Communications AR9271 802.11n .
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250_bcm7271: fix leak in `brcmuart_probe`
Smatch reports:
drivers/tty/serial/8250/8250_bcm7271.c:1120 brcmuart_probe() warn:
'baud_mux_clk' from clk_prepare_enable() not released on lines: 1032.
The issue is fixed by using a managed clock. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ymfpci: Create card with device-managed snd_devm_card_new()
snd_card_ymfpci_remove() was removed in commit c6e6bb5eab74 ("ALSA:
ymfpci: Allocate resources with device-managed APIs"), but the call to
snd_card_new() was not replaced with snd_devm_card_new().
Since there was no longer a call to snd_card_free, unloading the module
would eventually result in Oops:
[697561.532887] BUG: unable to handle page fault for address: ffffffffc0924480
[697561.532893] #PF: supervisor read access in kernel mode
[697561.532896] #PF: error_code(0x0000) - not-present page
[697561.532899] PGD ae1e15067 P4D ae1e15067 PUD ae1e17067 PMD 11a8f5067 PTE 0
[697561.532905] Oops: 0000 [#1] PREEMPT SMP NOPTI
[697561.532909] CPU: 21 PID: 5080 Comm: wireplumber Tainted: G W OE 6.2.7 #1
[697561.532914] Hardware name: System manufacturer System Product Name/TUF GAMING X570-PLUS, BIOS 4408 10/28/2022
[697561.532916] RIP: 0010:try_module_get.part.0+0x1a/0xe0
[697561.532924] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 49 89 fc bf 01 00 00 00 e8 56 3c f8 ff <41> 83 3c 24 02 0f 84 96 00 00 00 41 8b 84 24 30 03 00 00 85 c0 0f
[697561.532927] RSP: 0018:ffffbe9b858c3bd8 EFLAGS: 00010246
[697561.532930] RAX: ffff9815d14f1900 RBX: ffff9815c14e6000 RCX: 0000000000000000
[697561.532933] RDX: 0000000000000000 RSI: ffffffffc055092c RDI: ffffffffb3778c1a
[697561.532935] RBP: ffffbe9b858c3be8 R08: 0000000000000040 R09: ffff981a1a741380
[697561.532937] R10: ffffbe9b858c3c80 R11: 00000009d56533a6 R12: ffffffffc0924480
[697561.532939] R13: ffff9823439d8500 R14: 0000000000000025 R15: ffff9815cd109f80
[697561.532942] FS: 00007f13084f1f80(0000) GS:ffff9824aef40000(0000) knlGS:0000000000000000
[697561.532945] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[697561.532947] CR2: ffffffffc0924480 CR3: 0000000145344000 CR4: 0000000000350ee0
[697561.532949] Call Trace:
[697561.532951] <TASK>
[697561.532955] try_module_get+0x13/0x30
[697561.532960] snd_ctl_open+0x61/0x1c0 [snd]
[697561.532976] snd_open+0xb4/0x1e0 [snd]
[697561.532989] chrdev_open+0xc7/0x240
[697561.532995] ? fsnotify_perm.part.0+0x6e/0x160
[697561.533000] ? __pfx_chrdev_open+0x10/0x10
[697561.533005] do_dentry_open+0x169/0x440
[697561.533009] vfs_open+0x2d/0x40
[697561.533012] path_openat+0xa9d/0x10d0
[697561.533017] ? debug_smp_processor_id+0x17/0x20
[697561.533022] ? trigger_load_balance+0x65/0x370
[697561.533026] do_filp_open+0xb2/0x160
[697561.533032] ? _raw_spin_unlock+0x19/0x40
[697561.533036] ? alloc_fd+0xa9/0x190
[697561.533040] do_sys_openat2+0x9f/0x160
[697561.533044] __x64_sys_openat+0x55/0x90
[697561.533048] do_syscall_64+0x3b/0x90
[697561.533052] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[697561.533056] RIP: 0033:0x7f1308a40db4
[697561.533059] Code: 24 20 eb 8f 66 90 44 89 54 24 0c e8 46 68 f8 ff 44 8b 54 24 0c 44 89 e2 48 89 ee 41 89 c0 bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 77 32 44 89 c7 89 44 24 0c e8 78 68 f8 ff 8b 44
[697561.533062] RSP: 002b:00007ffcce664450 EFLAGS: 00000293 ORIG_RAX: 0000000000000101
[697561.533066] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f1308a40db4
[697561.533068] RDX: 0000000000080000 RSI: 00007ffcce664690 RDI: 00000000ffffff9c
[697561.533070] RBP: 00007ffcce664690 R08: 0000000000000000 R09: 0000000000000012
[697561.533072] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000080000
[697561.533074] R13: 00007f13054b069b R14: 0000565209f83200 R15: 0000000000000000
[697561.533078] </TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix data race on CQP completion stats
CQP completion statistics is read lockesly in irdma_wait_event and
irdma_check_cqp_progress while it can be updated in the completion
thread irdma_sc_ccq_get_cqe_info on another CPU as KCSAN reports.
Make completion statistics an atomic variable to reflect coherent updates
to it. This will also avoid load/store tearing logic bug potentially
possible by compiler optimizations.
[77346.170861] BUG: KCSAN: data-race in irdma_handle_cqp_op [irdma] / irdma_sc_ccq_get_cqe_info [irdma]
[77346.171383] write to 0xffff8a3250b108e0 of 8 bytes by task 9544 on cpu 4:
[77346.171483] irdma_sc_ccq_get_cqe_info+0x27a/0x370 [irdma]
[77346.171658] irdma_cqp_ce_handler+0x164/0x270 [irdma]
[77346.171835] cqp_compl_worker+0x1b/0x20 [irdma]
[77346.172009] process_one_work+0x4d1/0xa40
[77346.172024] worker_thread+0x319/0x700
[77346.172037] kthread+0x180/0x1b0
[77346.172054] ret_from_fork+0x22/0x30
[77346.172136] read to 0xffff8a3250b108e0 of 8 bytes by task 9838 on cpu 2:
[77346.172234] irdma_handle_cqp_op+0xf4/0x4b0 [irdma]
[77346.172413] irdma_cqp_aeq_cmd+0x75/0xa0 [irdma]
[77346.172592] irdma_create_aeq+0x390/0x45a [irdma]
[77346.172769] irdma_rt_init_hw.cold+0x212/0x85d [irdma]
[77346.172944] irdma_probe+0x54f/0x620 [irdma]
[77346.173122] auxiliary_bus_probe+0x66/0xa0
[77346.173137] really_probe+0x140/0x540
[77346.173154] __driver_probe_device+0xc7/0x220
[77346.173173] driver_probe_device+0x5f/0x140
[77346.173190] __driver_attach+0xf0/0x2c0
[77346.173208] bus_for_each_dev+0xa8/0xf0
[77346.173225] driver_attach+0x29/0x30
[77346.173240] bus_add_driver+0x29c/0x2f0
[77346.173255] driver_register+0x10f/0x1a0
[77346.173272] __auxiliary_driver_register+0xbc/0x140
[77346.173287] irdma_init_module+0x55/0x1000 [irdma]
[77346.173460] do_one_initcall+0x7d/0x410
[77346.173475] do_init_module+0x81/0x2c0
[77346.173491] load_module+0x1232/0x12c0
[77346.173506] __do_sys_finit_module+0x101/0x180
[77346.173522] __x64_sys_finit_module+0x3c/0x50
[77346.173538] do_syscall_64+0x39/0x90
[77346.173553] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[77346.173634] value changed: 0x0000000000000094 -> 0x0000000000000095 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable preemption in bpf_perf_event_output
The nesting protection in bpf_perf_event_output relies on disabled
preemption, which is guaranteed for kprobes and tracepoints.
However bpf_perf_event_output can be also called from uprobes context
through bpf_prog_run_array_sleepable function which disables migration,
but keeps preemption enabled.
This can cause task to be preempted by another one inside the nesting
protection and lead eventually to two tasks using same perf_sample_data
buffer and cause crashes like:
kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
BUG: unable to handle page fault for address: ffffffff82be3eea
...
Call Trace:
? __die+0x1f/0x70
? page_fault_oops+0x176/0x4d0
? exc_page_fault+0x132/0x230
? asm_exc_page_fault+0x22/0x30
? perf_output_sample+0x12b/0x910
? perf_event_output+0xd0/0x1d0
? bpf_perf_event_output+0x162/0x1d0
? bpf_prog_c6271286d9a4c938_krava1+0x76/0x87
? __uprobe_perf_func+0x12b/0x540
? uprobe_dispatcher+0x2c4/0x430
? uprobe_notify_resume+0x2da/0xce0
? atomic_notifier_call_chain+0x7b/0x110
? exit_to_user_mode_prepare+0x13e/0x290
? irqentry_exit_to_user_mode+0x5/0x30
? asm_exc_int3+0x35/0x40
Fixing this by disabling preemption in bpf_perf_event_output. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: meson_sm: fix to avoid potential NULL pointer dereference
of_match_device() may fail and returns a NULL pointer.
Fix this by checking the return value of of_match_device. |
| In the Linux kernel, the following vulnerability has been resolved:
net: tls: avoid hanging tasks on the tx_lock
syzbot sent a hung task report and Eric explains that adversarial
receiver may keep RWIN at 0 for a long time, so we are not guaranteed
to make forward progress. Thread which took tx_lock and went to sleep
may not release tx_lock for hours. Use interruptible sleep where
possible and reschedule the work if it can't take the lock.
Testing: existing selftest passes |
| In the Linux kernel, the following vulnerability has been resolved:
ptp_qoriq: fix memory leak in probe()
Smatch complains that:
drivers/ptp/ptp_qoriq.c ptp_qoriq_probe()
warn: 'base' from ioremap() not released.
Fix this by revising the parameter from 'ptp_qoriq->base' to 'base'.
This is only a bug if ptp_qoriq_init() returns on the
first -ENODEV error path.
For other error paths ptp_qoriq->base and base are the same.
And this change makes the code more readable. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: tpm_vtpm_proxy: fix a race condition in /dev/vtpmx creation
/dev/vtpmx is made visible before 'workqueue' is initialized, which can
lead to a memory corruption in the worst case scenario.
Address this by initializing 'workqueue' as the very first step of the
driver initialization. |
| In the Linux kernel, the following vulnerability has been resolved:
samples/bpf: Fix buffer overflow in tcp_basertt
Using sizeof(nv) or strlen(nv)+1 is correct. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: fix null pointer dereference in ovl_get_acl_rcu()
Following process:
P1 P2
path_openat
link_path_walk
may_lookup
inode_permission(rcu)
ovl_permission
acl_permission_check
check_acl
get_cached_acl_rcu
ovl_get_inode_acl
realinode = ovl_inode_real(ovl_inode)
drop_cache
__dentry_kill(ovl_dentry)
iput(ovl_inode)
ovl_destroy_inode(ovl_inode)
dput(oi->__upperdentry)
dentry_kill(upperdentry)
dentry_unlink_inode
upperdentry->d_inode = NULL
ovl_inode_upper
upperdentry = ovl_i_dentry_upper(ovl_inode)
d_inode(upperdentry) // returns NULL
IS_POSIXACL(realinode) // NULL pointer dereference
, will trigger an null pointer dereference at realinode:
[ 205.472797] BUG: kernel NULL pointer dereference, address:
0000000000000028
[ 205.476701] CPU: 2 PID: 2713 Comm: ls Not tainted
6.3.0-12064-g2edfa098e750-dirty #1216
[ 205.478754] RIP: 0010:do_ovl_get_acl+0x5d/0x300
[ 205.489584] Call Trace:
[ 205.489812] <TASK>
[ 205.490014] ovl_get_inode_acl+0x26/0x30
[ 205.490466] get_cached_acl_rcu+0x61/0xa0
[ 205.490908] generic_permission+0x1bf/0x4e0
[ 205.491447] ovl_permission+0x79/0x1b0
[ 205.491917] inode_permission+0x15e/0x2c0
[ 205.492425] link_path_walk+0x115/0x550
[ 205.493311] path_lookupat.isra.0+0xb2/0x200
[ 205.493803] filename_lookup+0xda/0x240
[ 205.495747] vfs_fstatat+0x7b/0xb0
Fetch a reproducer in [Link].
Use the helper ovl_i_path_realinode() to get realinode and then do
non-nullptr checking. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/powernv/sriov: perform null check on iov before dereferencing iov
Currently pointer iov is being dereferenced before the null check of iov
which can lead to null pointer dereference errors. Fix this by moving the
iov null check before the dereferencing.
Detected using cppcheck static analysis:
linux/arch/powerpc/platforms/powernv/pci-sriov.c:597:12: warning: Either
the condition '!iov' is redundant or there is possible null pointer
dereference: iov. [nullPointerRedundantCheck]
num_vfs = iov->num_vfs;
^ |
| In the Linux kernel, the following vulnerability has been resolved:
refscale: Fix uninitalized use of wait_queue_head_t
Running the refscale test occasionally crashes the kernel with the
following error:
[ 8569.952896] BUG: unable to handle page fault for address: ffffffffffffffe8
[ 8569.952900] #PF: supervisor read access in kernel mode
[ 8569.952902] #PF: error_code(0x0000) - not-present page
[ 8569.952904] PGD c4b048067 P4D c4b049067 PUD c4b04b067 PMD 0
[ 8569.952910] Oops: 0000 [#1] PREEMPT_RT SMP NOPTI
[ 8569.952916] Hardware name: Dell Inc. PowerEdge R750/0WMWCR, BIOS 1.2.4 05/28/2021
[ 8569.952917] RIP: 0010:prepare_to_wait_event+0x101/0x190
:
[ 8569.952940] Call Trace:
[ 8569.952941] <TASK>
[ 8569.952944] ref_scale_reader+0x380/0x4a0 [refscale]
[ 8569.952959] kthread+0x10e/0x130
[ 8569.952966] ret_from_fork+0x1f/0x30
[ 8569.952973] </TASK>
The likely cause is that init_waitqueue_head() is called after the call to
the torture_create_kthread() function that creates the ref_scale_reader
kthread. Although this init_waitqueue_head() call will very likely
complete before this kthread is created and starts running, it is
possible that the calling kthread will be delayed between the calls to
torture_create_kthread() and init_waitqueue_head(). In this case, the
new kthread will use the waitqueue head before it is properly initialized,
which is not good for the kernel's health and well-being.
The above crash happened here:
static inline void __add_wait_queue(...)
{
:
if (!(wq->flags & WQ_FLAG_PRIORITY)) <=== Crash here
The offset of flags from list_head entry in wait_queue_entry is
-0x18. If reader_tasks[i].wq.head.next is NULL as allocated reader_task
structure is zero initialized, the instruction will try to access address
0xffffffffffffffe8, which is exactly the fault address listed above.
This commit therefore invokes init_waitqueue_head() before creating
the kthread. |
| In the Linux kernel, the following vulnerability has been resolved:
dm flakey: don't corrupt the zero page
When we need to zero some range on a block device, the function
__blkdev_issue_zero_pages submits a write bio with the bio vector pointing
to the zero page. If we use dm-flakey with corrupt bio writes option, it
will corrupt the content of the zero page which results in crashes of
various userspace programs. Glibc assumes that memory returned by mmap is
zeroed and it uses it for calloc implementation; if the newly mapped
memory is not zeroed, calloc will return non-zeroed memory.
Fix this bug by testing if the page is equal to ZERO_PAGE(0) and
avoiding the corruption in this case. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: use smc_lgr_list.lock to protect smc_lgr_list.list iterate in smcr_port_add
While doing smcr_port_add, there maybe linkgroup add into or delete
from smc_lgr_list.list at the same time, which may result kernel crash.
So, use smc_lgr_list.lock to protect smc_lgr_list.list iterate in
smcr_port_add.
The crash calltrace show below:
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 0 PID: 559726 Comm: kworker/0:92 Kdump: loaded Tainted: G
Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 449e491 04/01/2014
Workqueue: events smc_ib_port_event_work [smc]
RIP: 0010:smcr_port_add+0xa6/0xf0 [smc]
RSP: 0000:ffffa5a2c8f67de0 EFLAGS: 00010297
RAX: 0000000000000001 RBX: ffff9935e0650000 RCX: 0000000000000000
RDX: 0000000000000010 RSI: ffff9935e0654290 RDI: ffff9935c8560000
RBP: 0000000000000000 R08: 0000000000000000 R09: ffff9934c0401918
R10: 0000000000000000 R11: ffffffffb4a5c278 R12: ffff99364029aae4
R13: ffff99364029aa00 R14: 00000000ffffffed R15: ffff99364029ab08
FS: 0000000000000000(0000) GS:ffff994380600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000f06a10003 CR4: 0000000002770ef0
PKRU: 55555554
Call Trace:
smc_ib_port_event_work+0x18f/0x380 [smc]
process_one_work+0x19b/0x340
worker_thread+0x30/0x370
? process_one_work+0x340/0x340
kthread+0x114/0x130
? __kthread_cancel_work+0x50/0x50
ret_from_fork+0x1f/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: at91-pio4: check return value of devm_kasprintf()
devm_kasprintf() returns a pointer to dynamically allocated memory.
Pointer could be NULL in case allocation fails. Check pointer validity.
Identified with coccinelle (kmerr.cocci script).
Depends-on: 1c4e5c470a56 ("pinctrl: at91: use devm_kasprintf() to avoid potential leaks")
Depends-on: 5a8f9cf269e8 ("pinctrl: at91-pio4: use proper format specifier for unsigned int") |
| In the Linux kernel, the following vulnerability has been resolved:
driver core: fix potential null-ptr-deref in device_add()
I got the following null-ptr-deref report while doing fault injection test:
BUG: kernel NULL pointer dereference, address: 0000000000000058
CPU: 2 PID: 278 Comm: 37-i2c-ds2482 Tainted: G B W N 6.1.0-rc3+
RIP: 0010:klist_put+0x2d/0xd0
Call Trace:
<TASK>
klist_remove+0xf1/0x1c0
device_release_driver_internal+0x196/0x210
bus_remove_device+0x1bd/0x240
device_add+0xd3d/0x1100
w1_add_master_device+0x476/0x490 [wire]
ds2482_probe+0x303/0x3e0 [ds2482]
This is how it happened:
w1_alloc_dev()
// The dev->driver is set to w1_master_driver.
memcpy(&dev->dev, device, sizeof(struct device));
device_add()
bus_add_device()
dpm_sysfs_add() // It fails, calls bus_remove_device.
// error path
bus_remove_device()
// The dev->driver is not null, but driver is not bound.
__device_release_driver()
klist_remove(&dev->p->knode_driver) <-- It causes null-ptr-deref.
// normal path
bus_probe_device() // It's not called yet.
device_bind_driver()
If dev->driver is set, in the error path after calling bus_add_device()
in device_add(), bus_remove_device() is called, then the device will be
detached from driver. But device_bind_driver() is not called yet, so it
causes null-ptr-deref while access the 'knode_driver'. To fix this, set
dev->driver to null in the error path before calling bus_remove_device(). |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/pmem: Fix nvdimm registration races
A loop of the form:
while true; do modprobe cxl_pci; modprobe -r cxl_pci; done
...fails with the following crash signature:
BUG: kernel NULL pointer dereference, address: 0000000000000040
[..]
RIP: 0010:cxl_internal_send_cmd+0x5/0xb0 [cxl_core]
[..]
Call Trace:
<TASK>
cxl_pmem_ctl+0x121/0x240 [cxl_pmem]
nvdimm_get_config_data+0xd6/0x1a0 [libnvdimm]
nd_label_data_init+0x135/0x7e0 [libnvdimm]
nvdimm_probe+0xd6/0x1c0 [libnvdimm]
nvdimm_bus_probe+0x7a/0x1e0 [libnvdimm]
really_probe+0xde/0x380
__driver_probe_device+0x78/0x170
driver_probe_device+0x1f/0x90
__device_attach_driver+0x85/0x110
bus_for_each_drv+0x7d/0xc0
__device_attach+0xb4/0x1e0
bus_probe_device+0x9f/0xc0
device_add+0x445/0x9c0
nd_async_device_register+0xe/0x40 [libnvdimm]
async_run_entry_fn+0x30/0x130
...namely that the bottom half of async nvdimm device registration runs
after the CXL has already torn down the context that cxl_pmem_ctl()
needs. Unlike the ACPI NFIT case that benefits from launching multiple
nvdimm device registrations in parallel from those listed in the table,
CXL is already marked PROBE_PREFER_ASYNCHRONOUS. So provide for a
synchronous registration path to preclude this scenario. |
